Pass HPE ACEP HPE6-A75 exam [Apr 18, 2024] Updated 72 Questions
HP HPE6-A75 Actual Questions and 100% Cover Real Exam Questions
HP HPE6-A75 (Aruba Certified Edge Professional) certification exam is intended for IT professionals who are seeking to validate their skills in designing, implementing, and managing Aruba wireless and wired networks. Aruba Certified Edge Professional Exam certification is aimed at individuals who are responsible for deploying and managing enterprise networks in small to large organizations. HPE6-A75 exam tests the proficiency of candidates in implementing Aruba technologies such as ClearPass, AirWave, and ArubaOS-CX.
NEW QUESTION # 33
When is it necessary to use an SNMP based Enforcement profile to send a VIAN?
- A. When we have to assign a vlan to a wired user on a third party wired switch that doesn't support RADIUS return attributes.
- B. When we have to assign a VLAN to a wireless user on an Aruba Mobility Controller.
- C. When we have to assign a VIAN to a wired user on an Aruba Mobility Controller.
- D. When we have to assign a VLAN to a wired user on an Aruba Mobility Access Switch.
- E. When we have to assign a VLAN to a wired user on a third party wired switch that doesn't support RADIUS authentication.
Answer: D
NEW QUESTION # 34
An AOS-Switch uses tunneled node. What is a best practice for the path between an AOS-Switch and its Mobility Controller?
- A. The path implements MACsec
- B. The path has a device that applies NAT
- C. The path crosses no VLAN boundaries
- D. The path can support jumbo frames
Answer: D
NEW QUESTION # 35
Refer to the exhibit.
A known unicast packet is received from Switch-1 on the standby and must be forwarded to Switch-2. How does the VSF fabric decide which port in the aggregated (ink should forward the packet?
- A. The standby sends the packet to the commander over a VSF link, and the commander decides the correct port.
- B. The standby uses its own port in the link aggregation to forward the fabric.
- C. The standby uses the typical load sharing algorithm, and it might select either its port or the commander's port.
- D. The standby selects the port on the designated forwarder for the aggregation.
Answer: B
NEW QUESTION # 36
A company has AOS-Switches, Aruba ClearPass, and Aruba Airwave. A network administrator needs to set up a new switch with the same settings found on other switches in the company. Which action rs likely to be the most useful to perform the task?
- A. Access the Network Device view on ClearPass.
- B. View usage patterns on the switches on AirWave.
- C. View the current running config on each switch.
- D. Use the configuration audit tool on AirWave.
Answer: A
NEW QUESTION # 37
Refer to the exhibit.
Traffic between the servers m Area l takes a less optimal path rather than the link associated with VLAN l OOO, subnet 10.0.0.0/30. Based on the exhibits, why is this the case?
- A. OSPF routing switches choose the best intra-area routes based on Area 1 links only.
- B. The link between Switch-1 and Switch-2 has gone down.
- C. The metric on the VLAN 1000 interface is too low.
- D. Switch-1 and Switch-2 cannot achieve adjacency on VLAN 1000 due to mismatches.
Answer: A
NEW QUESTION # 38
The administrator expects the AP to connect to a cluster, but the AP tails to connect. The administrator examines the configuration of an AP from apboot mode shown in the exhibit. What can the administrator determine about the configuration of the AP?
- A. The AP is configured as a RAP to terminate on a Mobility Master.
- B. The AP is configured as a RAP to terminate on a stand-alone controller.
- C. The AP is configured to terminate on a non-cluster Mobility Controller.
- D. The AP is configured to terminate on a Mobility Controller in a cluster.
Answer: A
NEW QUESTION # 39
Which protocol do Mobility Controllers (MCs) use to detect a failed Mobility Master (MM)?
- A. VRRP
- B. SNMP
- C. PAPI
- D. IPSec
Answer: B
NEW QUESTION # 40
An administrator deploys Aruba Mobility Controller 7005s to a company's branch offices. The administrator wants to disable the console port to prevent unauthorized access to the controllers.
Which controller command should the administrator use to implement this policy?
- A. console disable
- B. mgmt-user console-block
- C. no mgmt-user console
- D. no console enable
Answer: B
NEW QUESTION # 41
Refer to the exhibit.
The network administrator wants to reduce failover time If a switch link m VIAN 100 goes down.
What should the administrator do?
- A. Lower the dead timer on the BDR of VLAN 100.
- B. Configure graceful restart on all of the OSPF routing devices on VLAN 100.
- C. Configure echo mode BFD on VLAN 100 on all OSPF routing devices on VLAN 100.
- D. Lower the hello timer only on the BDR of VLAN 100.
Answer: C
NEW QUESTION # 42
What is true about clustering and AP connections to cluster members?
- A. The default thresholds are 75% for the Rebalanced Threshold and 25% for the Unbalanced Threshold.
- B. During rebalancing, the active load is redistributed first.
- C. The AP will always stay connected to the LMS IP address configured in the AP profile.
- D. AP load balancing is disabled by default.
Answer: D
NEW QUESTION # 43
An administrator needs to authenticate users connected to an ArubaOS Switch where the switch authenticates the user, assigns the firewall policies to the user, and processes some of the users' traffic. Which connection method should the administrator configure on the ArubaOS-Switch?
- A. Per-port tunneled node
- B. VLAN tunneled mode
- C. Split-tunneled mode
- D. Per-user tunneled node
Answer: A
NEW QUESTION # 44
An administrator configures an ArubaOS-Switch for per -user tunneled node. Which protocols does the switch use to establish and maintain a connection with the Aruba Mobility Controller (MO? (Select two.)
- A. SSL
- B. PAPI
- C. GRE
- D. IPSec
Answer: B,C
NEW QUESTION # 45
A network administrator wants to use Aruba AirWave to audit an AOS-Switch configuration. What rs one requirement?
- A. The switch is authorized in AirWave, which has the correct credentials to log in as a CLI manager.
- B. The switch is set to Manage Read-Write mode in AirWave but is not set to Monitor Only + Firmware Updates.
- C. The switch specifies the AirWave IP address for the RADIUS server used for Telnet and SSH authentication.
- D. The switch defines the AirWave IP address in its zero touch provisioning (ZTP) profile.
Answer: C
NEW QUESTION # 46
An administrator wants to implement bandwidth limits for guest users to restrict their Internet usage. On the Mobility Master (MM), where would the administrator define these limits?
- A. Firewall policy
- B. AAA policy
- C. User role
- D. 802.1X policy
Answer: A
NEW QUESTION # 47
Why is a terminate session enforcement profile used during posture checks with 802.1 x authentication?
- A. To remediate the client applications and firewall do that updates can be installed
- B. To blacklist the user when they are in an unhealthy posture state
- C. To send a RADIUS CoA message from the ClearPass server to the client
- D. To force the user to re-authenticate and run through the service flow again
- E. To disconnect the user for 30 seconds when they are in an unhealthy posture state
Answer: C
NEW QUESTION # 48
A company requires AOS-Switches at the campus core. The switches:
Will act as the default gateways for several campus VLANs Must provide redundancy for their services and tolerate the loss of a link or an entire switch Must recover from the failure of one of the switches within a second or less VRRP and MSTP are proposed to meet these requirements. What is an issue with this proposal?
- A. VRRP provides redundancy against lost links but not a failed switch.
- B. VRRP takes longer than a second to fail over.
- C. VRRP does not interoperate with MSTP.
- D. VRRP provides routing redundancy but not default gateway redundancy.
Answer: B
NEW QUESTION # 49
Which solution allows administrators to monitor link status and port utilization on AOS-Switches from a centralized location?
- A. Aruba ClearPass
- B. Aruba Mobility Manager
- C. Aruba Mobility Controller
- D. Aruba AirWave
Answer: D
NEW QUESTION # 50
A customer wants to implement Virtual IP redundancy, such that in case of a ClearPass server outage, 802.1x authentications will not be interrupted. The administrator has enabled a single Virtual IP address on two ClearPass servers.
Which statements accurately describe next steps? (Select two.)
- A. The NAD should be configured with the primary node IP address for RADIUS authentication on the 802.1x network.
- B. The primary node will respond to authentication requests sent to the Virtual IP address when the primary node is active.
- C. A new Virtual IP address should be created for each NAD.
- D. The NAD should be configured with the Virtual IP address for RADIUS authentications on the
802.1x network. - E. Both the primary and secondary nodes will respond to authentication requests sent to the Virtual IP address when the primary node is active.
Answer: B,D
NEW QUESTION # 51
Refer to the exhibit.
Switch-1 and Switch-2 connect on interface A23. The switches experience a connectivity issue.
The network administrator sees that both switches show this interface as up. The administrator sees the output shown in the exhibit on Switch-1.
What is a typical issue that could cause this output?
- A. an issue with queuing, caused by mismatched QoS settings
- B. mismatched IP addresses on the VLAN for the link
- C. asymmetric routing introduced by a routing configuration error
- D. a hardware issue, such as a broken cable
Answer: D
NEW QUESTION # 52
Which ArubaOS CLl command can an administrator execute to determine if AP load balancing is enabled in a cluster?
- A. show ap active
- B. show switches
- C. show aaa cluster essid
- D. show lc-cluster group-membership
Answer: D
NEW QUESTION # 53
Refer to the exhibit.
An Enforcement Profile has been created in the Policy Manager as shown. Which action will ClearPass take based on this Enforcement Profile?
- A. ClearPass will send the Session-Timeout attribute in the RADIUS Access-Accept packet to the NAD and the NAD will end the user's session after 600 seconds.
- B. ClearPass will send the Session-Timeout attribute in the RADIUS Access-Accept packet to the User and the user's session will be terminated after 600 seconds.
- C. ClearPass will count down 600 seconds and send a RADIUS CoA message to the NAD to end the user's session after this time is up.
- D. ClearPass will send the Session-Timeout attribute in the RADIUS Access-Request packet to the NAD and the NAD will end the user's session after 600 seconds.
- E. ClearPass will count down 600 seconds and send a RADIUS CoA message to the user to end the user's session after this time is up.
Answer: A
NEW QUESTION # 54
A company has AOS-Switches, Aruba ClearPass, and Aruba Airwave. A network administrator needs to set up a new switch with the same settings found on other switches in the company.
Which action rs likely to be the most useful to perform the task?
- A. Access the Network Device view on ClearPass.
- B. View usage patterns on the switches on AirWave.
- C. View the current running config on each switch.
- D. Use the configuration audit tool on AirWave.
Answer: A
NEW QUESTION # 55
An administrator wants to use Airwave to manually add devices on the network. Where should the administrator perform this action?
- A. in Device Setup
- B. in Groups
- C. in Devices
- D. in AMP Setup
Answer: A
NEW QUESTION # 56
......
HP HPE6-A75 certification exam is intended for IT professionals who have experience with Aruba edge solutions and are seeking to validate their expertise. Aruba Certified Edge Professional Exam certification is ideal for network administrators, architects, engineers, and consultants who work with Aruba edge solutions on a regular basis.
HP HPE6-A75 Real 2024 Braindumps Mock Exam Dumps: https://examcollection.actualcollection.com/HPE6-A75-exam-questions.html