New HPE6-A66 Test Materials & Valid HPE6-A66 Test Engine
HPE6-A66 Updated Exam Dumps [2023] Practice Valid Exam Dumps Question
NEW QUESTION # 27
A company has two buildings on a campus, where each building has three floors, which two wiring closets per floor Assume that there will be 24 APs connected via POE+ to each wiring closet, along with 128 wired user connections. Which backplane stacking solution will provide the necessary Ethernet port capacity for all devices on Building 1 Floor 2 and is fully meshed?
- A. Two 2930F 24-port POE+ switches and three 2930F 48-port switches per wiring closet
- B. One 381 OM 24-port POE+ switches and two 2930M 48-port switches per wiring closet
- C. One 2930M 24-port POE+ switch and two 2930M 48-port switches per wiring closet
- D. Two 381 OM 24-port POE+ switches and three 381OM 48-port switches per wiring closet
Answer: C
NEW QUESTION # 28
A company has hired a network architect to replace an existing legacy wireless and wired network The building is one-story and contains four wiring closets Based on the information the network architect gathered from the company, one 48-port POE+ switch and three 48-port non-POE+ switches will be placed in each wiring closet. One stacking domain should be created for each wiring closet that supports 40 Gbps uplinks.
Which stacking solution should the architect implement for the floor that meets the requirements and is the most cost-effective'?
- A. VSF
- B. Distributed trunking
- C. VSX
- D. Backplane stacking
Answer: C
NEW QUESTION # 29
A company has chosen an Aruba mobility controller solution for the redesign of their wireless network The design will have two 7205 controllers in a cluster for campus employees and a single VMC-50 virtual controller for remote access via a DMZ. A Mobility Master (MM) is used for centralized license and controller management. All controllers will minimally run ArubaOS 8 4 or later Currently the company has 1.000 employees. There are 30 branch offices that will use RAPs to connect to the DMZ controller. A peak of 100 users concurrently using the VIA client will also connect to the DMZ controller.
How many Aruba LIC-VIA licenses does the company need to purchase for this solution?
- A. 0
- B. 1
- C. 2
- D. 1,030
Answer: D
NEW QUESTION # 30
A network architect is designing a new wired and wireless solution for for a company. The company has two buildings on a campus, which each building has three floors. The campus core will be placed in the basement of Building 1. Each wiring closet has eight strands of multi-mode OM3 grade fiber that connect to a wiring closet of the first floor of the building it is contained, referred to as a main distribution frame (MDF). The maximum distance between a floor's wiring closet and the MDF is 100 feet (30 meters). The maximum distance between the two MDFs and the campus core is no more than 150 feet (45 meters). There are eight strands of multi-mode OM3 grade fiber from these two MDF closets to the campus core.
Based on this information, which type of design should be used and what is the maximum speeds supported all uplinks for the existing the multi-mode fiber?
- A. two-tier and 40 Gbps
- B. three-tier and 40 Gbps
- C. two-tier and 10 Gbps
- D. three-tier and 10 Gbps
Answer: D
NEW QUESTION # 31
Which AP mode allows an AP to operate autonomously?
- A. IAP
- B. OCAP
- C. RAP
- D. AM
Answer: B
NEW QUESTION # 32
NewStellar has a main corporate campus in a business park with two adjacent buildings. Each building has three floors and each floor is 322 x 175 feet (98 x 53 meters) for 56,350 square feet (5,235 square meters) total. The ceiling for each floor is 12 feet (3.6 meters) high with a drop-down ceiling at 10 feet (3 meters). The network architect has given you one floor to analyze, Building 1 Floor 2, shown in the attached exhibit.
This floor has a central main corridor with washrooms, stairs, elevators and supply and network cabinets. There are cubicles around the perimeter of the floor. The central part main corridor's dimensions contain 9,350 square feet (870 square meters). Assuming that wireless coverage is not required in the central area, which square footage (square meter) value should a network architect use when determining the number of APs in a capacity design for each floor?
- A. 55.750 square feet {5,175 square meters)
- B. 338,100 feet {31,410 square meters)
- C. 47.000 square feet {4,365 square meters)
- D. 56.350 square feet {5,235 square meters)
Answer: D
NEW QUESTION # 33
A network architect is redesigning the access layer in a data center for a customer. The access layer requires fixed-port switches that support VSF and data center features like L2 VXLAN and REST-API Which switching solution should the network architect recommend?
- A. 0
- B. 3810M
- C. 1
- D. 2930F
Answer: D
NEW QUESTION # 34
A customer has a need to track traffic patterns and anomalies on a pair of ArubaOS-CX 8400 series switches. Which technology will the customer need to deploy for these switches?
- A. Network Analysis Engine
- B. NetEdit
- C. Mobility First
- D. 2 CiearPass
Answer: B
NEW QUESTION # 35
Which feature does the Aruba AP 555 support? (Select two.)
- A. high density indoor locations
- B. desk wall plate mounted
- C. 802.11ac and lower standards only
- D. three radios
- E. weather proof and temperature hardened
Answer: A,C
NEW QUESTION # 36
A company needs an upgrade of its access layer switches. The solution requires that devices connected to the access layer by authenticated and their traffic processed by the firewall features of the Aruba Mobility Controllers. Which solution should the company implement?
- A. Dynamic segmentation
- B. GRE tunneling
- C. PAPI mobility
- D. iPsec tunneling
Answer: D
NEW QUESTION # 37
A customer has over 100 access layer switches. The customer requires user authentication done via the Aruba Dynamic Segmentation feature. What components are required to implement this solution? (Select two.)
- A. AirWave server
- B. Aruba mobility controller
- C. enterpnse authentication server
- D. Aruba APs
- E. Active Directory server
Answer: A,B
NEW QUESTION # 38
A network architect has developed a design for a new Aruba Wi-Fi network that will include a hardware Mobility Master (MM) running the ArubaOS 8 4 operating system that will manage:
* Two clustered 7205 controllers with 300 campus APs
* Two clustered VMC-50 controllers with 75 remote APs
The architect plans on creating user roles, firewall policies, and wireless IPS policies on the controllers as well as implementing AirMatch. What would meet the license requirements for this scenario?
- A. LIC-MM-VA-500. LIC-MC-VA-50 (X2), LIC-AP <x375). PEF (x375). RFP (x375)
- B. LIC-MC-VA-50 (x1), LIC-AP (300), PEF (X300). RFP (x300)
- C. LIC-MM-VA-50, LIC-MC-VA-50 (X1), LIC-AP (X300), PEF <x300). RFP (x300)
- D. LIC-MC-VA-50 (X2), LIC-AP (375), PEF (X375), RFP (X375)
Answer: C
NEW QUESTION # 39
Which feature does the Aruba AP 387 support?
- A. Indoor usage
- B. included external directional antennas
- C. 60GHZRF
- D. 802.11 ax
Answer: C
NEW QUESTION # 40
A network architect is creating a new wireless solution for a customer. Wireless coverage is required throughout all four floors of two buildings on the same campus. Dynamic RF capabilities, including AirMatch, are required. Seamless roaming is required within and between the two buildings. Each floor will have approximately 20 APs and 6 external APs are required for connectivity between the two buildings.
- A. Two 7205 mobility controllers in a cluster
- B. Two 7030 mobility controllers in a cluster
- C. A standalone 7008 controller per floor
- D. Given this information, which Aruba solution would be the most cost-effective while still meeting the customer's requirements? O An IAP cluster per floor
Answer: D
NEW QUESTION # 41
A network architect needs to design a new wireless solution for a small company The architect estimates that about 150 APs will be required to implement a capacity design. Roaming support is required. Also, the design requires meshing to connect some of the APs to the network.
The customer requires that client state synchronization be provided for real-time failover.
Which solution would most cost-effectively meet these requirements?
- A. lAPs in a cluster
- B. Two 7030 mobility controller and campus APs in a cluster
- C. FRAPs in a cluster
- D. Two 7205 mobility controller and campus APs in a cluster
Answer: C
NEW QUESTION # 42
A high-end theater venue will be implementing an Aruba wireless solution using ceiling- and wall-mounted APs. The venue wants to ensure the the APs blend into the ceiling and wall environments. What solution should the customer use to ensure that wireless coverage is not hampered?
- A. Place the APs above the ceiling and behind the walls
- B. Place a strip of tape over the LEDs
- C. Order Aruba AP covers for the APs
- D. Paint the APs to match the ceilings or walls
Answer: A
NEW QUESTION # 43
A network architect plans to use two ArubaOS 5406 switches in a wiring closet configured in a VSF domain The VSF link requires a 40 GDps connection Which SFP+ transceiver solutions would meet this requirement?
- A. SFP
- B. QSFP28
- C. SmartRate
- D. QSFP+ LC
Answer: C
NEW QUESTION # 44
A network architect needs to plan a new wireless network
- A. Airwave and Central only
- B. Airwave, Central, and Windows only
- C. Central only
- D. Airwave, Central, Windows, Mac OSX, and Linux
Answer: A
NEW QUESTION # 45
Which two challenges do802.1ig barcode scanners present to a WLAN design? (Select two.)
- A. determining the RF channel bandwidth consumed per Barcode scanner
- B. encountering RF interference by devices
- C. roaming between APs
- D. providing consistent performance on all available channels
- E. implementing adequate security measures to ensure PCI compliance
Answer: D,E
NEW QUESTION # 46
A network architect wants to estimate the number of Aruba APs that will be needed Tor a new wireless design and determine the wireless coverage using VisualRF. The company requires a high-density design. The building has 200.000 square feet. How many APs should the network architect add to VisualRF in order to perform the coverage analysis?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 47
Refer to the exhibit.
When planning the use of Cat7 cabling for a SmartRate connection between an ArubaOS AP and an ArubaOS switch, which sections should be considered when calculating distance?
- A. A + B + C + D
- B. A + B + C
- C. A + C
- D. A + B
Answer: A
NEW QUESTION # 48
A network architect is replacing an old wireless implementation based on 802.11 a with a new wireless solution. The company has a lot of money invested in legacy wireless barcode scanners and will not be replacing them. However, the bandwidth that the company expects each AP to have less than 700 Mbps in bandwidth, and this is not expected to change in the future.
Which wireless solution would best meet this company's needs and be the most cost-effective?
- A. 802.11n
- B. 802.11ax
- C. 802.11ac
- D. 802.11g
Answer: B
NEW QUESTION # 49
A university department has a program in video processing and editing. Students in the department use Wi-Fi to interact with the video servers. The editing and processing is done by the students accessing and using the video servers. However, the students must then stream their results, via Wi-Fi to their laptops to verify the results. A network architect has determined that no more than 20 APs will be needed for the Wi-Fi solution. Because of the large amount of bandwidth used during the streaming, the Aruba mobility controller solution will need to support 10 Gbps links.
Which solution would cost-effectively meet this customer's requirements?
- A. 0
- B. 1
- C. 2
- D. 7240XM
Answer: A
NEW QUESTION # 50
A customer is designing a new wired network. The customer requires 50 Gbps uplinks, VSF logical switching, and smart rate port support Which of the following switches would meet these requirements?
- A. 8300 series
- B. 3810M series
- C. 5400R series
- D. 6300 series
Answer: B
NEW QUESTION # 51
......
HPE6-A66 Sample with Accurate & Updated Questions: https://examcollection.actualcollection.com/HPE6-A66-exam-questions.html