Get Perfect Results with Premium JN0-252 Dumps Updated 88 Questions
Free JN0-252 Exam Study Guide for the NEW Dumps Test Engine
NEW QUESTION # 22
Which statement is correct about a WLAN RF medium?
- A. A WLAN RF is a half-duplex, contention-free medium where the access point polls each station in turn.
- B. A WLAN RF is a full duplex, contention free medium where each client transmits on a separate channel.
- C. A WLAN RF is a half-duplex, shared medium where 802.11 stations contend with each other for access.
- D. A WLAN RF is a full-duplex, contention-free medium where 802.11 stations can transmit and receive at the same time.
Answer: C
Explanation:
Reference: https://thewlan.com.au/2017/01/13/cwna-chapter-7-wireless-lan-topologies/
NEW QUESTION # 23
Which device detects a Layer 1 bad cable action within Marvis Actions?
- A. Mist Edge
- B. access point
- C. wireless client
- D. wired client
Answer: A
Explanation:
* The Mist Edge device is responsible for detecting Layer 1 issues, such as bad cable actions, within the Marvis Actions framework.
* Mist Edge integrates with Marvis AI to provide detailed insights into network health, including physical layer issues like faulty cables, which can impact network performance.
* By identifying and alerting administrators to these problems, Mist Edge helps maintain the integrity and reliability of the network infrastructure.
* Reference: Juniper Networks documentation on Mist Edge and its diagnostic capabilities.
NEW QUESTION # 24
Which two statements are true about packet captures on an AP? (Choose two.)
- A. Only wireless packets can be captured.
- B. The involved APs remain in service.
- C. The involved APs are taken out of service.
- D. Wireless and wired packets can be captured.
Answer: B,D
Explanation:
* Mist APs have the capability to capture both wireless and wired packets. This feature allows for comprehensive network troubleshooting by providing visibility into both types of traffic.
* When performing packet captures on Mist APs, the APs remain in service. This means they continue to operate and serve clients while the capture is ongoing, ensuring minimal disruption to network operations.
* This functionality is critical for maintaining network availability and performance while conducting detailed packet analysis.
* Reference: Juniper Networks documentation on Mist AI AP packet capture features.
NEW QUESTION # 25
Which two statements are correct about label configuration? (Choose two.)
- A. Labels created at the site level can be applied at the organization level.
- B. Labels can only be created at the organization level.
- C. Labels can be created at either the organization level or site level.
- D. Labels created at the organization level can be used in WLAN templates.
Answer: C,D
NEW QUESTION # 26
You want to determine where you have coverage issues in your network using Marvis Actions.
Which Marvis Action category should you use in this situation?
- A. Connectivity
- B. Clients
- C. AP
- D. Application
Answer: C
NEW QUESTION # 27
Which two domains comprise artificial intelligence (AI)? (Choose two.)
- A. SIEM
- B. virtualization
- C. deep learning
- D. machine learning
Answer: C,D
Explanation:
Reference: https://www.analyticssteps.com/blogs/6-major-branches-artificial-intelligence-ai
NEW QUESTION # 28
You are troubleshooting a signal strength issue when you notice that the signal strength changes from -70 to -73 dBm as you move from one room to another.
In this scenario, what is happening?
- A. Signal strength has doubled.
- B. Signal strength has increased by 10x.
- C. Signal strength has decreased by 10x.
- D. Signal strength has halved.
Answer: D
NEW QUESTION # 29
What are two requirements for a WebSocket call? (Choose two.)
- A. WebSocket connection URL
- B. encryption token
- C. WebSocket configuration
- D. authentication token
Answer: A,C
Explanation:
Mist Cloud Communication Protocol: The Mist cloud platform uses HTTPS (Hypertext Transfer Protocol Secure) to communicate with connected access points. This ensures that the data sent and received is encrypted and secure, adhering to modern security standards (Juniper Networks) (CertEnsure).
Security and Reliability: Using HTTPS provides a secure channel over which configuration changes, updates, and monitoring data can be safely transmitted between the Mist cloud and the access points. This protocol is widely accepted and trusted for secure communications over the internet.
Incorrect Options:
MQTT: While MQTT is a lightweight messaging protocol often used in IoT, it is not the protocol used by Mist cloud for AP communication.
SSH: Secure Shell (SSH) is primarily used for secure remote command-line access and not for the primary communication between Mist cloud and APs.
PPTP: Point-to-Point Tunneling Protocol (PPTP) is used for implementing VPNs and is not relevant to the communication between Mist cloud and access points.
Reference:
Juniper Networks Documentation: Mist Cloud Communication
NEW QUESTION # 30
What are two requirements to connect an AP to the Mist Cloud? (Choose two.)
- A. You need a CA SSL certificate.
- B. You need a DHCP server.
- C. You need a static IP address.
- D. You need DNS resolution.
Answer: C,D
NEW QUESTION # 31
..has reported a network outage. After locating the user, you find that the switch interface facing the user Is down but there Is no alert in the Mist Ul. You want to ensure that in the future, you receive an alert when a switch *face is down. You have already verified that the Critical Switch Port Down alarm is configured and enabled on the Alerts Configuration page.
his scenario, which action in the Mist Ul will satisfy the requirement?
- A. Navigate to the switch in the Mist Ul and modify the Port Profile configuration to enable Persistent (Sticky) MAC Learning for the Port Profile.
- B. Enable the Critical Switch Port Up alarm on the Alerts Configuration page.
- C. Navigate to the switch in the Mist Ul and modify the Port Configuration to enable the Up/Down Port Alerts setting for the interface.
- D. Disable the Critical Switch Pott Down alarm on the Alerts Configuration page.
Answer: C
Explanation:
* To ensure that you receive alerts when a switch interface goes down, you need to enable the Up/Down Port Alerts setting for the specific interface.
* This setting can be configured by navigating to the switch within the Mist UI and modifying the port configuration. Enabling this setting ensures that any changes in the port status, such as going down, will trigger an alert.
* This is critical for proactive network monitoring and to promptly address any connectivity issues.
* Reference: Juniper Networks documentation on configuring port alerts within the Mist UI.
NEW QUESTION # 32
According to Juniper Networks, what are two best practices for AP placement (excluding AP12) for optimal accuracy and stability of location-based services? (Choose two.)
- A. Mount the AP on the ceiling with the LED facing the floor.
- B. Mount the AP above the ceiling, the LED orientation does not matter.
- C. Enable a wireless mesh.
- D. Each AP should have an unobstructed line of sight to at least two other APs.
Answer: A,D
Explanation:
Line of Sight: For optimal accuracy and stability of location-based services, each access point (AP) should have an unobstructed line of sight to at least two other APs. This ensures robust triangulation and accurate location tracking.
Ceiling Mounting: Mounting APs on the ceiling with the LED facing the floor is recommended. This position provides the best coverage and performance for both Wi-Fi and BLE signals, essential for reliable location services.
Reference:
Juniper Mist Deployment Guide
Best Practices for AP Placement
Top of Form
Bottom of Form
NEW QUESTION # 33
Felicia is the network administrator for a Windows Server network. There are several junior network administrators employed.
Felicia suspects that changes have been made to the security settings on several servers. There is a standard security template with which all new servers are configured.
What tool can Felicia use to verify the current security settings against those within the original template? Select the best answer.
- A. IP Security Monitor
- B. Security Templates
- C. Active Directory Users and Computers
- D. Security Configuration and Analysis
- E. System Monitor
Answer: D
NEW QUESTION # 34
Which location-based service does User Engagement provide?
- A. Wi-Fi presence analytics
- B. wayfinding
- C. asset tracking
- D. ultra wide band location
Answer: B
Explanation:
Wayfinding: User Engagement in Mist AI includes wayfinding services that help users navigate through complex environments such as large buildings or campuses. This feature uses real-time location data to guide users to their destinations.
Implementation: Wayfinding leverages Mist's BLE (Bluetooth Low Energy) technology and virtual beacons to provide precise indoor navigation and enhance the user experience.
Reference:
Juniper Networks Documentation
NEW QUESTION # 35
Which two statements correctly describe the provisioning of greenfield and brownfield switches using the Mist Ul? (Choose two.)
- A. Brownfield switches are provisioned using the Adopt Switches button.
- B. Greenfield switches are provisioned using the Claim Switches button.
- C. Brownfield switches are provisioned using the Claim Switches button.
- D. Greenfield switches are provisioned using the Adopt Switches button.
Answer: A,D
Explanation:
* Both greenfield (new, unconfigured) and brownfield (pre-existing, configured) switches can be adopted into the Mist management framework using the "Adopt Switches" button within the Mist UI.
* This process involves bringing the switches under Mist management by applying the necessary configurations and policies from the Mist cloud.
* The adoption process ensures that all switches, regardless of their initial state, are integrated and managed consistently within the Mist ecosystem.
* Reference: Juniper Networks documentation on switch adoption and provisioning using the Mist UI.
NEW QUESTION # 36
In a standard roam from one access point to another access point, what makes the decision to roam?
- A. the cloud
- B. the client device
- C. the controller
- D. the access point
Answer: B
NEW QUESTION # 37
You notice a green LED emitted from your AP43.
Referring to the exhibit, what does this signal indicate?
- A. The AP is configured correctly and at least one user is connected to it.
- B. The AP is not configured correctly with no users connected to it.
- C. The AP is not configured correctly but one user is connected to it.
- D. The AP is configured correctly with no users connected to it.
Answer: D
NEW QUESTION # 38
list administrator may link their Mist login to which type of social account login?
- A. Google
- B. Facebook
- C. Linked In
- D. TikTok
Answer: A
Explanation:
Google Account Integration: Mist administrators can link their Mist login to a Google account. This facilitates easier access and management of Mist services using a single sign-on (SSO) mechanism provided by Google.
Benefits of SSO: Using Google SSO simplifies user management, reduces password fatigue, and enhances security through Google's robust authentication mechanisms.
Reference:
Juniper Networks Documentation
NEW QUESTION # 39
Which statement is correct about Mist AP packet capture?
- A. You can only trigger wired or wireless packet captures dynamically.
- B. You can only configure wired packet captures manually.
- C. You can configure a wired or wireless packet capture manually.
- D. You can only configure wireless packet captures manually.
Answer: C
NEW QUESTION # 40
In which two Mist configuration levels would you create labels? (Choose two.)
- A. site
- B. switch
- C. location
- D. organization
Answer: A,D
NEW QUESTION # 41
Alert templates are assigned to sites in which area of the Mist GUI?
- A. Site Configuration
- B. Site Group
- C. Alert Template Configuration
- D. Organization Settings
Answer: C
Explanation:
Reference: https://www.juniper.net/documentation/us/en/software/nce/nce-214-midsize-branch- mist-pwp/topics/topic-map/nce-214-midsize-branch-mist-example_part2.html
NEW QUESTION # 42
What are two valid Mist subscription status states in the Mist GUI? (Choose two.)
- A. Perpetual
- B. Expired
- C. Exceeded
- D. Staged
Answer: B,C
NEW QUESTION # 43
......
JN0-252 PDF Dumps Extremely Quick Way Of Preparation: https://examcollection.actualcollection.com/JN0-252-exam-questions.html