CTS-I Practice Test Questions Answers Updated 480 Questions [Q198-Q221]

Share

CTS-I Practice Test Questions Answers Updated 480 Questions

CTS-I dumps & AVIXA Communications Sure Practice with 480 Questions


AVIXA CTS-I Exam Certification Details:

MemberExam Price$475(USD)
Number of Questions110
Books / TrainingCandidate Handbook
Exam NameAVIXA Certified Technology Specialist - Installation (CTS-I)
Sample QuestionsAVIXA CTS-I Sample Questions
Duration150 mins


AVIXA CTS-I - Installation Exam Syllabus Topics:

TopicWeight
Duty A: Conducting Pre-Installation Activities20%
Task 1: Review Audiovisual Project Documentation4%
Task 2: Conduct Technical Site Survey4%
Task 3: Prepare for Audiovisual Installation4%
Task 4: Evaluate Overall Facility Readiness4%
Task 5: Conduct On-Site Preparations for Installation4%
Duty B: Conducting Site Rough-In/First-Fix10%
Task 1: Deinstallation of Existing Equipment and cabling2%
Task 2: Mount Substructure4%
Task 3: Pull Cable4%
Duty C: Installing Audiovisual Systems38%
Task 1: Assemble AV Rack4%
Task 2: Wire the AV Equipment Rack5%
Task 3: Distribute AV Equipment4%
Task 4: Mount AV Equipment4%
Task 5: Terminate Cables5%
Task 6: Configure Network Properties of Equipment4%
Task 7: Load Configuration and Control Programs4%
Task 8: Test the AV System4%
Task 9: Calibrate the AV System4%
Duty D: Perform Systems Close Out11%
Task 1: Demonstrate to Client or Client's Representative that System Performs to Specifications4%
Task 2:Provide Training on System Operation4%

 

NEW QUESTION # 198
The ISO numerical scheme is used to _____.
Response:

  • A. calculate the length of the hardware
  • B. test the amount of impurities present in the material the hardware is made from
  • C. calculate the weight of the material the hardware is made from
  • D. indicate the strength of the material the hardware is made from

Answer: D


NEW QUESTION # 199
Which of the following stage lighting instruments is used as a spotlight?

  • A. Pan and tilt lighting
  • B. Parabolic Aluminized Reflector Light
  • C. ELS or Ellipsoidal Reflective Spotlight
  • D. PAR64

Answer: C


NEW QUESTION # 200
This conduit type forms a lightweight continuous flexible tube that offers the advantage of EMI protection.

  • A. Thinwall
  • B. Rigid
  • C. PVC
  • D. Flex

Answer: D


NEW QUESTION # 201
Sound energy can reflect in either _____ fashion.

  • A. backward or split
  • B. direct or scattered
  • C. specular or broken
  • D. reversed or diffused

Answer: B


NEW QUESTION # 202
A reference microphone for setting equalization of a speaker system should: (Choose all that apply.)

  • A. be omnidirectional
  • B. have a nonreflective surface
  • C. have a flat, on-axis response
  • D. be the same brand and type used in the system as designed

Answer: A,C


NEW QUESTION # 203
What should you do with equipment manuals and software documentation?
Select all that apply.
Response:

  • A. Leave a copy with the AV rack
  • B. Arrange them by function
  • C. Arrange them in alphabetical order
  • D. Leave a copy in the storage closet

Answer: A,B,C


NEW QUESTION # 204
The original LCD monitor specified on the project was not available. The model used to replace it has a lower native resolution than the original monitor. What device could be used to keep the EDID table from now calculating the EDID table to a lower resolution for the whole system?
Response:

  • A. Transcoder
  • B. Scan Converter
  • C. EDID emulator
  • D. Scaler

Answer: D


NEW QUESTION # 205
When mounting a 75lb (34 kg) projector with a 15lb (7 kg) mount, the substructure should be able to support a minimum of:

  • A. 270lbs (122 kg)
  • B. 450lbs (204 kg)
  • C. 90lbs (41 kg)
  • D. 180lbs (82 kg)

Answer: B


NEW QUESTION # 206
Place a cable label on ____ of every cable.

  • A. both ends of the cable jacket
  • B. the cable jacket of the source end
  • C. the cable jacket on the load end
  • D. every connector

Answer: A


NEW QUESTION # 207
Different colors of light vary in __________.

  • A. Wavelength
  • B. Proportion
  • C. Intensity
  • D. Chromaticity

Answer: A


NEW QUESTION # 208
Which of the following can control systems operate remotely? (Choose all that apply.)

  • A. Display monitors
  • B. Lights
  • C. Drapes/curtains
  • D. Power

Answer: A,B,C,D


NEW QUESTION # 209
What does a 3-LED tester test for?

  • A. Neutral/ground swap
  • B. Open ground-wiring error
  • C. Neutral/ground shorts
  • D. Fault terminations

Answer: B


NEW QUESTION # 210
What is a macro?
Response:

  • A. A single function activated by a switch
  • B. A function activated by a button
  • C. A set or sequence of functions activated by a button
  • D. Multiple functions activated by separate buttons

Answer: C


NEW QUESTION # 211
Which of the following documents should an AV integrator submit in the event that a manufacturer has discontinued a projector model?
Response:

  • A. Progress report (PR)
  • B. Letter of transmittal
  • C. Request for change (RFC)
  • D. Construction change directive (CCD)

Answer: C


NEW QUESTION # 212
What type of video is best used to verify audio/video synchronization?

  • A. Landscapes with orchestra music
  • B. A blip-and-flash test video
  • C. News anchors speaking
  • D. Team sports

Answer: B


NEW QUESTION # 213
What does the first number in an aspect ratio represent?
Response:

  • A. Length
  • B. Width
  • C. Depth
  • D. Height

Answer: B


NEW QUESTION # 214
How could you secure a Blu-ray player in a rack for stability?

  • A. It is unnecessary to secure equipment such as a Blu-ray player
  • B. With a custom rack shelf and brackets
  • C. With a mounting rail
  • D. With electrical tape

Answer: B


NEW QUESTION # 215
A rack unit is equivalent to approximately ____.

  • A. 2in (51mm)
  • B. 2.25in (57mm)
  • C. 1.5in (38mm)
  • D. 1.75in (44.5mm)

Answer: D


NEW QUESTION # 216
What is the problem with the cable bundle dressing in the picture?

Response:

  • A. The cables are not RGB.
  • B. The cable ties are too close.
  • C. The cable insulation is too soft.
  • D. The ties are overtightened.

Answer: D


NEW QUESTION # 217
Projector optics is defined as a _____.

  • A. series of lenses that carry an image on a screen
  • B. light source and a series of lamps that carry an image on a screen
  • C. series of mirrors and lights that carry an image on a screen
  • D. system of lamps and lenses that carry an image on a screen

Answer: D


NEW QUESTION # 218
A ______ is a "seamless switcher" that synchronizes video transitions when in vertical retrace to ensure that transitions between sources are clean.

  • A. Vertical Interval Switcher
  • B. Crash Switcher
  • C. Distribution Amplifier
  • D. Matrix routing switcher

Answer: A


NEW QUESTION # 219
Which of the following does HDCP 2.x support? (Choose all that apply.)

  • A. 128 connected devices for each transmitter
  • B. 7 layers or repeater levels for each transmitter
  • C. 4 layers or repeater levels for each transmitter
  • D. 32 connected devices for each transmitter

Answer: C,D


NEW QUESTION # 220
After performing a Technical Site Survey, all information recorded should be relayed to:
Response:

  • A. The AV Project Engineer
  • B. The Sales Person
  • C. The Building Engineer
  • D. The Client

Answer: A


NEW QUESTION # 221
......

New CTS-I Exam Questions| Real CTS-I Dumps: https://examcollection.actualcollection.com/CTS-I-exam-questions.html